Asus RS162-E4/RX4 - Manual (Page 88)

Chapter 5: BIOS setup -1
5.3.5 IDE Channel 0 Master/Slave SATA Port
1/2/3/4
IDE Channel 0 Master
Type [Auto]
Muti-Sector Transfers [Disabled]
LBA Mode Control [Disabled]
32-Bit I/O [Disabled]
Transfer Mode [Standard]
Ultra DMA Mode [Disabled]
Item Specific Help
F1 ：Help ↑↓ Select Item -/+ Change Values F9：Setup Defaults
ESC ：Exit →← Select Menu Enter Select Sub-menu F10：Save and Exit
PhoenixBIOS SETUP UTILITY
Main
Type [Auto]
The BIOS automatically detects the values opposite the dimmed items.
These values are not user-configurable.
Muti-Sector Transfers [Disabled]
Enables or disables data multi-sectors transfers. When set to Auto, the
data transfer from and to the device occurs multiple sectors at a time if
the device supports multi-sector transfer feature. When set to [Disabled],
the data transfer from and to the device occurs one sector at a time.
Configuration options: [Disabled] [Auto]
LBA Mode Control [Disabled]
Enables or disables the LBA mode. Setting to Auto enables the LBA mode
if the device supports this mode, and if the device was not previously
formatted with LBA mode disabled. Configuration options: [Disabled] [Auto]
32-Bit I/O [Disabled]
Enables or disables 32-bit data transfer. Configuration options: [Disabled]
[Enabled]