3 remove the expansion cards, 4 installing the sas expansion slot – Asus RS162-E4/RX4 User Manual

Page 33

ASUS RS162-E4/RX4

-1

2.5.3 Remove the expansion cards

To change expension cards:

1. Pull the riser card upward (see

the arrow in the figure) as shown

to release it from the slot.

2. Set the riser card aside, and then

using a screw driver to remove

the screws on the card.

3. Remove the expension card from

the riser card.

2.5.4 Installing the SAS expansion slot

This product package provide a SAS expansion module for you to purchse

optionally. If you want to install any peripherial SAS devices, please follow

the steps below:

1. Remove the riser card from the

system.

This optional module will

use the slot on the PCI riser

card, please cosider the total

number of expansion cards

you plan to install in the

system.