Asus RS162-E4/RX4 - Manual (Page 100)

Chapter 5: BIOS setup -
v02.58 (C) Copyright 1985-2004, American Megatrends, Inc.
Hardware Monitor
CPU1 Domain 0 Temperature 47 ℃/116℉
CPU1 Domain 1 Temperature 52 ℃/125℉
CPU2 Domain 0 Temperature N/A
CPU2 Domain 1 Temperature N/A
SYSTEM 1 Temperature 26 ℃/78℉
SYSTEM 2 Temperature 31 ℃/87℉
FAN1 2925 RPM
FAN2 667 RPM
FAN3 667 RPM
FAN4 667 RPM
FAN5 667 RPM
FAN6 667 RPM
FAN7 667 RPM
FAN8 667 RPM
Smart Fan Control [Smart Fan II]
Item Specific Help
W h e n t h e c u r r e n t
temperature equals
this limit, the fan
will be turned on IF
it is not already.
F1 ：Help ↑↓ Select Item -/+ Change Values F9：Setup Defaults
ESC ：Exit →← Select Menu Enter Select Sub-menu F10：Save and Exit
PhoenixBIOS SETUP UTILITY
Advanced
Power On By RTC Alarm [Disabled]
Allows you to enable or disable RTC to generate a wake-up event.
Configuration options: [Disabled] [Enabled]
The following items appear only if you enable the Power On By RTC
Alarm item.
RTC Alarm Date [0]
To set the date of alarm, highlight this item and press to display
a date chart. Press <+> or <-> to change scroll through the options, then
press when done. The default setting [0] is equivalent to everyday
alarm. Configuration options: [0] [1] ~ [31]
RTC Alarm Date [00 : 00 : 00]
To set the time of alarm:
1. Press <+> or <-> to set the desired value.
2. Use the left/right arrow key or press to move to the next field.
3. Press when done.
5.4.8 Hardware Monitor
This menu shows the hardware monitor configuration settings. Select an
item then press to display the configuration options.