Asus RS162-E4/RX4 - Manual (Page 102)

Chapter 5: BIOS setup -0
The CPU 1/2 Domain 0/1 Target Temperature and SYSTEM 1/2 Target
Temperature appear only when you set Smart Fan Control as [Smart
Fan]
Smart Fan Control [Smart Fan II]
Allows you to disable or configure the Smart Fan feature. Configuration
options: [Disabled] [Smart Fan] [Smart Fan II]
CPU1/2 Domain 0 Target Temperature [075]
CPU1/2 Domain 1 Target Temperature [075]
Allows you to set the target CPU temperature at which the CPU fan will
start running if the fan is not yet turned on.
SYSTEM1/2 Target Temperature
Allows you to set the target sytem temperature at which the system fan
will start running if the fan is not yet turned on.
FBD_FAN1 Speed, VCORE0/1 Voltage, VTT, +1.5V, +1.8V,
+3V, +12V, +5V, +5VSB
These fields show the auto-detected values and are not user-configurable.