Asus RS162-E4/RX4 - Manual (Page 123)

ASUS RS162-E4/RX4 -11
4. The Select New Array Type screen apprears. Use the arrow keys to
select Create IM Volume, then press .
5. The Create New Array screen shows the disks you can add to make up
the IS volume. Use the arrow key to select a disk, then move the cursor
to the RAID Disk column. To include this disk in the array, press <+>, <->,
or .
By default, the RAID Disk field shows No before array creation. This
field is grayed out under the following conditions:
• The disk does not meet the minimum requirements for use in a RAID
array.
• The disk is not large enough to mirror existing data on the primary
drive.
• The disk has been selected as the Hot Spare for the RAID array.
• The disk is already part of another array.