SENA ProBee-ZE20S-SEME - Manual (Page 99)

ProBee-ZE20S-SExx User Guide Rev 1.8 99
Response
OK
OK or ERROR
Default 01-01-2000/00:00:00
Range 01-01-2000/00:00:00 - 02-07-2136/06:28:15
7.14.9 AT+MSGETLAST or AT+MGL
Description
Send ‘Get Last Message’ command(Messaging cluster) to destination node.
(client-side command)
Execute
AT+DEST=
AT+MSGETLAST
Response OK or ERROR
7.14.10 AT+DLLIST or AT+DLT
Description Show DRLC Event List.
Execute AT+DLLIST?
Response
event ID|clss|gr|dura|cr|cool(sp)|heat(sp)|av|du|ct|start time
..
OK
7.14.11 AT+DLSTARTTIME or AT+DST
Description
Get/Set DRLC Start Time. This value will be used in AT+DLUPDATE and
AT+DLGETSCH. The format of time is determined by ATU value.
Execute AT+DLSTARTTIME? AT+DLSTARTTIME=
Response
OK
OK or ERROR
Default 01-01-2000/00:00:00
Range 01-01-2000/00:00:00 - 02-07-2136/06:28:15
7.14.12 AT+DLUPDATE or AT+DLU
Description Update DRLC Event.
Execute
AT+DLUPDATE=,,,
point>, load adjustment percentage>, cycle>,
control>
Response OK or ERROR
7.14.13 AT+DLREPORTES or AT+DRE
Description
Send ‘Report Event Status’ command(DRLC cluster) to destination node. (client-
side command)
Execute AT+DEST=