SENA ProBee-ZE20S-SEME - Manual (Page 102)

ProBee-ZE20S-SExx User Guide Rev 1.8 102
8 S-Registers
Register number Descriptions
11
12
13
14
22
23
41
42
43
44
45
51
52
53
54
55
56
71
Display incoming message in command mode
Display command echo
Display command responses
Manage LED status
Permit joining timeout
TX power mode
GPIO pull-up
GPIO monitoring period
GPIO monitoring node
GPIO change detection sampling
GPIO remote control
Poll timeout for a parent node
Poll period for a sleepy end-device
Sleep duration
Standby timeout
Rejoin timeout
Poll period for an end-device
Enable Frequency agility
8.1 Display Options
8.1.1 S11
Description
Get/Set the display mode. It determines to display incoming message in command
mode.
Execute ATS11? ATS11=
Response
OK
OK
Default 1
Range 0 - 1
8.1.2 S12
Description Get/Set the command echo mode.
Execute ATS12? ATS12=
Response
OK
OK
Default 1
Range 0 – 1