SENA ProBee-ZE20S-SEME - Manual (Page 64)

ProBee-ZE20S-SExx User Guide Rev 1.8 64
Then ProBeeSEME node receives following message:
#Screen of ProBeeSEME(end-device)
+0000|SE_DISPLAY_MESSAGE|11335577|01|0200|Test Message|08-22-2013/15:08:30
5.4.8 Showing Attribute Information
Each Smart Energy node has its own attributes. User can see their information by running the AT
command as below:
Example) Show attributes of ProBeeSESI node
#Screen of ProBeeSESI(coordinator)
AT+ATTR # Show attributes of current device
clus|attr|data(clusterName)
0000|0000|01 (Basic)
0000|0001|00 (Basic)
0000|0002|00 (Basic)
0000|0003|00 (Basic)
0000|0007|00 (Basic)
0000|0011|00 (Basic)
0000|0012|01 (Basic)
0000|0013|00 (Basic)
0000|0014|00 (Basic)
0003|0000|0000 (Identify)
0701|0000|client-side (Demand Response and Load Control)
0701|0001|client-side (Demand Response and Load Control)
0701|0002|client-side (Demand Response and Load Control)
0701|0003|client-side (Demand Response and Load Control)
0800|0000|client-side (Key establishment)
0800|0000|0000 (Key establishment)
OK # Response
# clus: cluster id
# attr: attribute id
# data: stored data