SENA ProBee-ZE20S-SEME - Manual (Page 69)

ProBee-ZE20S-SExx User Guide Rev 1.8 69
AT+DLCANCELLOAD=0000ABAB
OK # Cancel DRLC Event (ID 0000ABAB) to ProBeeSEID
# Now Event ID 0000ABAB is canceled on ProBeeSEID
Then ProBeeSEID(end-device) receives following messages:
#Screen of ProBeeSEID(end-device)
+0000|SE_LOAD_CONTROL_EVENTS|0000ABAB
# Receive Load Control Events command from ProBeeSESI
AT+DLLIST # Show DRLC Event List
event ID|clss|gr|dura|cr|cool(sp)|heat(sp)|av|du|ct|start time
0000ABAB|0035|02|0200|05|15(0500)|25(0600)|10|03|04|08-04-2013/13:14:15
OK
+0000|SE_CANCEL_LOAD_CONTROL_EVENTS|0000ABAB|00000000|00000000
# Receive Cancel Load Control Events command from ProBeeSESI
AT+DLLIST # Show DRLC Event List
event ID|clss|gr|dura|cr|cool(sp)|heat(sp)|av|du|ct|start time
OK
5.4.13 Binding Price Cluster
ProBeeSESI node has server-side Price Cluster and ProBeeSEID has client-side Price Cluster. They can
communicate with each other by Price Cluster commands.
Example) Send ‘Publish Price’ command from ProBeeSESI node to ProBeeSEID node.
#Screen of ProBeeSESI(coordinator)
AT+DEST=CEDF,01 # Set destination address to ProBeeSEID
DESTINATION ADDRESS: 0xCEDF, END POINT: 0x01
OK
AT+PRCURRENTTIME=08-04-2013/14:20:30
OK
AT+PRSTARTTIME=08-04-2013/15:20:30
OK
AT+PRSETPUBLISH=0000EEEE,0000CCCC,24,1122,01,03,0200,11223344,55
# Send ‘Publish Price’ command to ProBeeSEID
OK
+CEDF|SE_GLOBAL_COMMAND|0700|0B # Response