SENA ProBee-ZE20S-SEME - Manual (Page 91)

ProBee-ZE20S-SExx User Guide Rev 1.8 91
OK
7.12.3 AT+DEST or AT+DE
Description
Set address of destination node. This address will be used in AT+CREAD,
AT+CWRITE, AT+CCMD, AT+SCMD and other SE commands.
Execute
AT+DEST=, or
AT+DEST=,
Response OK or ERROR
7.12.4 AT+SREAD or AT+SR
Description Read attribute from local node. (server-side command)
Execute AT+SREAD=,
Response
OK or ERROR
7.12.5 AT+CREAD or AT+CR
Description Read attribute from remote node. (client-side command)
Execute
AT+DEST=
AT+CREAD=,
Response
OK or ERROR
7.12.6 AT+SWRITE or AT+SW
Description Write attribute to local node. (server-side command)
Execute AT+SWRITE=,,
Response OK or ERROR
7.12.7 AT+CWRITE or AT+CW
Description Write attribute to remote node. (client-side command)
Execute
AT+DEST=
AT+CWRITE=,,
Response OK or ERROR
7.12.8 AT+SCMD or AT+SC
Description
Send server-side command message to destination node. (server-side
command)
Execute
AT+DEST=
AT+SCMD=,
Response OK or ERROR