SENA ProBee-ZE20S-SEME - Manual (Page 100)

ProBee-ZE20S-SExx User Guide Rev 1.8 100
AT+DLREPORTES=,
Response OK or ERROR
7.14.14 AT+DLGETSCH or AT+DGS
Description
Send ‘Get Scheduled Events’ command(DRLC cluster) to destination node.
(client-side command)
Execute
AT+DEST=
AT+DLGETSCH=
Response OK or ERROR
7.15 ProBeeSEME (Metering Device) Profile Commands
7.15.1 AT+SMRQMIRR or AT+SQM
Description
Send ‘Request Mirror Command’ command(Metering cluster) to destination node.
(server-side command)
Execute
AT+DEST=
AT+SMRQMIRR
Response OK or ERROR
7.15.2 AT+SMRVMIRR or AT+SVM
Description
Send ‘Remove Mirror Command’ command(Metering cluster) to destination node.
(server-side command)
Execute
AT+DEST=
AT+SMRVMIRR
Response OK or ERROR
7.15.3 AT+SMSETPR or AT+SSP
Description
Get/Set Metering Profile. This value will be used in ‘Get Profile Response’
command.
Execute AT+SMSETPR?
AT+SMSETPR=
period>,,
interval>,...
Response
ProfileIntervalPeriod:,
NumberOfPeriodsDelivered:
of periods delivered>
…
OK
OK or ERROR