SENA ProBee-ZE20S-SEME - Manual (Page 96)

ProBee-ZE20S-SExx User Guide Rev 1.8 96
Default 0000
Range 0000 – FFFF
7.13.9 AT+MSDISPLAY or AT+MDI
Description
Send ‘Display Message’ command(Messaging cluster) to destination node.
(server-side command)
Execute
AT+DEST=
AT+MSDISPLAY=?
Response OK or ERROR
7.13.10 AT+MSCANCEL or AT+MCA
Description
Send ‘Cancel Message’ command(Messaging cluster) to destination node.
(server-side command)
Execute
AT+DEST=
AT+MSCANCEL?
Response OK or ERROR
7.13.11 AT+DLLIST or AT+DLT
Description Show DRLC Event List.
Execute AT+DLLIST?
Response
event ID|clss|gr|dura|cr|cool(sp)|heat(sp)|av|du|ct|start time
..
OK
7.13.12 AT+DLSTARTTIME or AT+DST
Description
Get/Set DRLC Start Time. This value will be used in AT+DLSET. The format of
time is determined by ATU value.
Execute AT+DLSTARTTIME? AT+DLSTARTTIME=
Response
OK
OK or ERROR
Default 01-01-2000/00:00:00
Range 01-01-2000/00:00:00 - 02-07-2136/06:28:15
7.13.13 AT+DLSET or AT+DLS
Description Add/Modify DRLC Event.
Execute
AT+DLLIST=,,,
minutes>, level>, offset>, set point>,
offset>,,,
cycle>,