SENA ProBee-ZE20S-SEME - Manual (Page 71)

ProBee-ZE20S-SExx User Guide Rev 1.8 71
6 SE(Smart Energy) Profile Descriptions
6.1 Device Descriptions
Device descriptions specified in this profile are summarized in following Table 6-1, “Devices Specified in
the SE Profile”. The devices are organized according the end application areas they address. A product
that conforms to this specification shall implement at least one of these device descriptions and shall also
include the device descriptions corresponding to all applications implemented on the product where a
standard device description is specified in this profile. For example, if a product implements both a light
dimmer and a light sensor application, then the Dimmable Light and Light Sensor device descriptions
must both be supported. This list will be added to in future versions of the profile as new clusters are
developed to meet the needs of manufacturers. The reserved values shall not be used until the profile
defines them. Manufacturer-specific device descriptions shall reside on a separate endpoint and use a
private profile ID.
Table 6-1 Devices Specified in the SE Profile
Device Device ID
Generic Range Extender 0x0008
Smart Energy Energy Service Interface (Supported in ProBeeSESI) 0x0500
Metering Device (Supported in ProBeeSEME) 0x0501
In-Premises Display (Supported in ProBeeSEID) 0x0502
Programmable Communicating Thermostat (PCT) 0x0503
Load Control Device 0x0504
Smart Appliance 0x0505
Prepayment Terminal 0x0506
6.2 ZigBee Cluster Library (ZCL)
This profile utilizes the clusters specified in the ZigBee Cluster Library. The implementation details for
each cluster are given in the ZCL specifications. Further specification and clarification are given in this
profile where necessary. The ZCL provides a mechanism for clusters to report changes to the value of
various attributes. It also provides commands to configure the reporting parameters. The attributes that a
particular cluster is capable of reporting are listed in the ZCL specification for each cluster. Products shall
support the reporting mechanism for all attributes specified in the ZCL that the product implements within
a given cluster. The tables in 6.4 ProBee SE Profiles Description show which clusters are supported in
ProBeeSExx firmwares and which attributes / commands are available in each cluster.