SENA ProBee-ZE20S-SEME - Manual (Page 66)

ProBee-ZE20S-SExx User Guide Rev 1.8 66
Example) Write attribute to local node.
#Screen of ProBeeSESI(coordinator)
AT+SWRITE=0000,0012,00 # Write device attribute
# Basic cluster(0x0000),
# Device Enabled attribute(0x0012)
# Set to 0x00 (Disabled)
OK # Response
Example) Write attribute to remote node.
#Screen of ProBeeSEME(coordinator)
AT+DEST=0001950000000003,01 # Set destination node address
OK # Response
AT+CWRITE=0702,0001,010203040506# Write to attribute of destination node
# Metering cluster(0x0702),
# Current Max Demand Delivered
# attribute(0x0002)
# Set to 0x010203040506
5.4.11 Binding Metering Cluster
ProBeeSEME node has server-side Metering Cluster and ProBeeSEID has client-side Metering Cluster.
They can communicate with each other by Metering Cluster commands.
Example) Set ‘Metering Profile’ and ‘Metering End Time’ at ProBeeSEME node.
#Screen of ProBeeSEME(end-device)
AT+SMSETPR=12,AABBCC,010203 # Set Metering Profile
OK
AT+SMSETPR
ProfileIntervalPeriod: 12, NumberOfPeriodsDelivered: 2
Intervals:
AA BB CC
01 02 03
OK # Response
AT+SMENDTIME=08-04-2013/12:34:56 # Set Metering End Time
OK