SENA ProBee-ZE20S-SEME User Manual
Page 83
ProBee-ZE20S-SExx User Guide Rev 1.8
83
Execute
AT+EPID?
AT+EPID=
Response
OK
OK
Default
0000000000000000
Range
0000000000000000 – FFFFFFFFFFFFFFFF
7.4.4
AT+GROUPID or AT+GI
Description
Get/Set the 16-bit Group ID. It is used for multicast data reception.
Execute
AT+GROUPID?
AT+GROUPID=
Response
OK
OK
Default
0000
Range
0000 – FFFF
7.4.5
AT+POWER or AT+PW
Description
Get/Set the TX power at which the RF module transmits conducted power.
Execute
AT+POWER?
AT+POWER=
Response
OK
OK
Default
8
Range
-43 – 8
7.4.6
AT+STACK or AT+ZS
Description
Get/Set the ZigBee stack profile value. This value must be set the same on all
devices that should join the same network. (0: Network specific, 1: ZigBee, 2:
ZigBee Pro). Do NOT change default value if you want to use for Smart Energy
node.
Execute
AT+STACK?
AT+STACK=
Response
OK
OK
Default
2
Range
0 – 2
7.4.7
AT+NODENAME or AT+NN
Description
Get/Set the node name. It can be used to make a clear distinction role or
functionality of local node from others.
Execute
AT+NODENAME?
AT+NODENAME=
Response
OK
OK