SENA ProBee-ZE20S-SEME - Manual (Page 79)

ProBee-ZE20S-SExx User Guide Rev 1.8 79
7 AT Command Reference
7.1 Command Line Format
Each command line is composed of a prefix, body and terminator. Only “AT” can be used for the prefix.
The body is a string of characters. The terminator is or . A command can be one of the
followings:
 Read a configuration parameter:
AT?
 Do something:
AT
 Write a configuration parameter:
AT=,,,…
Commands denoted with a “+” character are extended AT commands.
S-registers are supported. Multiple commands in the same command line are not supported.
7.2 Standard AT Commands
7.2.1 AT
Description Check the state of the connection between host and ProBee device.
Execute AT
Response OK
7.2.2 ATE
Description Echo(1) or No Echo(0).
Execute ATE
Response OK
7.2.3 ATR
Description Response(1) or No Response(0).
Execute ATR
Response OK
7.2.4 ATS
Description Get/Set the S-registers.
Execute ATS ATS? ATS=