SENA ProBee-ZE20S-SEME - Manual (Page 101)

ProBee-ZE20S-SExx User Guide Rev 1.8 101
7.15.4 AT+SMFPENDTIME or AT+SFT
Description
Get/Set Metering Fast Poll Mode End Time. This value will be used in ‘Request
Fast Poll Mode Response’ command. The format of time is determined by ATU
value.
Execute AT+SMFPENDTIME? AT+SMFPENDTIME=
Response
OK
OK or ERROR
Default 01-01-2000/00:00:00
Range 01-01-2000/00:00:00 - 02-07-2136/06:28:15
7.15.5 AT+SMFPPERIOD or AT+SFP
Description
Get/Set Metering Fast Poll Mode Period. This value will be used in ‘Get Profile
Response’ command.
Execute AT+SMFPPERIOD? AT+SMFPPERIOD=
Response
OK
OK or ERROR
Default 00
Range 00 - FF
7.15.6 AT+SMENDTIME or AT+SET
Description
Get/Set Metering End Time. This value will be used in ‘Get Profile Response’
command. The format of time is determined by ATU value.
Execute AT+SMENDTIME? AT+SMENDTIME=
Response
OK
OK or ERROR
Default 01-01-2000/00:00:00
Range 01-01-2000/00:00:00 - 02-07-2136/06:28:15
7.15.7 AT+MSGETLAST or AT+MGL
Description
Send ‘Get Last Message’ command(Messaging cluster) to destination node.
(client-side command)
Execute
AT+DEST=
AT+MSGETLAST
Response OK or ERROR