SENA ProBee-ZE20S-SEME - Manual (Page 95)

ProBee-ZE20S-SExx User Guide Rev 1.8 95
format of time is determined by ATU value.
Execute AT+PRSTARTTIME? AT+PRSTARTTIME=
Response
OK
OK or ERROR
Default 01-01-2000/00:00:00
Range 01-01-2000/00:00:00 - 02-07-2136/06:28:15
7.13.5 AT+MSID or AT+MID
Description
Get/Set Message ID. This value will be used in AT+MSDISPLAY and
AT+MSCANCEL.
Execute AT+MSID? AT+MSID=
Response
OK
OK or ERROR
Default 00000000
Range 00000000 – FFFFFFFF
7.13.6 AT+MSCTRL or AT+MCT
Description
Get/Set Message Control. This value will be used in AT+MSDISPLAY and
AT+MSCANCEL.
Execute AT+MSCTRL? AT+MSCTRL=
Response
OK
OK or ERROR
Default 00
Range 00 – FF
7.13.7 AT+MSSTARTTIME or AT+MST
Description
Get/Set Messaging Start Time. This value will be used in AT+MSDISPLAY. The
format of time is determined by ATU value.
Execute AT+MSSTARTTIME? AT+MSSTARTTIME=
Response
OK
OK or ERROR
Default 01-01-2000/00:00:00
Range 01-01-2000/00:00:00 - 02-07-2136/06:28:15
7.13.8 AT+MSDURATION or AT+MDU
Description Get/Set Duration in Minutes. This value will be used in AT+MSDISPLAY.
Execute AT+MSDURATION? AT+MSDURATION=
Response
OK
OK or ERROR