Rainbow Electronics AT75C220 - Manual (Page 69)

AT75C220
69
PIO Output Disable Register
Register Name:PIO_ODR
Access Type:Write-only
This register is used to disable PIO output drivers. If the pin is driven by the peripheral, there is no effect on the pin, but the
information is stored. The register is programmed as follows:
1 = Disables the PIO output on the corresponding pin.
0 = No effect.
PIO Output Status Register
Register Name:PIO_OSR
Access Type:Read-only
Reset Value:0
This register shows the PIO pin control (output enable) status which is programmed in PIO_OER and PIO ODR. The
defined value is effective only if the pin is controlled by the PIO. The register reads as follows:
1 = The corresponding PIO is output on this line.
0 = The corresponding PIO is input on this line.
31 30 29 28 27 26 25 24
P31 P30 P29 P28 P27 P26 P25 P24
23 22 21 20 19 18 17 16
P23 P22 P21 P20 P19 P18 P17 P16
15 14 13 12 11 10 9 8
P15 P14 P13 P12 P11 P10 P9 P8
7 6 5 4 3 2 1 0
P7 P6 P5 P4 P3 P2 P1 P0
31 30 29 28 27 26 25 24
P31 P30 P29 P28 P27 P26 P25 P24
23 22 21 20 19 18 17 16
P23 P22 P21 P20 P19 P18 P17 P16
15 14 13 12 11 10 9 8
P15 P14 P13 P12 P11 P10 P9 P8
7 6 5 4 3 2 1 0
P7 P6 P5 P4 P3 P2 P1 P0