Tc status register – Rainbow Electronics AT75C220 User Manual
Page 117
AT75C220
117
TC Status Register
Register Name:TC_SR
Access Type:Read-only
•
COVFS: Counter Overflow Status
0 = No counter overflow has occurred since the last read of the Status Register.
1 = A counter overflow has occurred since the last read of the Status Register.
•
LOVRS: Load Overrun Status
0 = Load overrun has not occurred since the last read of the Status Register or WAVE = 1.
1 = RA or RB have been loaded at least twice without any read of the corresponding register since the last read of the
Status Register if WAVE = 0.
•
CPAS: RA Compare Status
0 = RA compare has not occurred since the last read of the Status Register or WAVE = 0.
1 = RA compare has occurred since the last read of the Status Register if WAVE = 1.
•
CPBS: RB Compare Status
0 = RB compare has not occurred since the last read of the Status Register or WAVE = 0.
1 = RB compare has occurred since the last read of the Status Register if WAVE = 1.
•
CPCS: RC Compare Status
0 = RC compare has not occurred since the last read of the Status Register.
1 = RC compare has occurred since the last read of the Status Register.
•
LDRAS: RA Loading Status
0 = RA Load has not occurred since the last read of the Status Register or WAVE = 1.
1 = RA Load has occurred since the last read of the Status Register, if WAVE = 0.
•
LDRBS: RB Loading Status
0 = RB load has not occurred since the last read of the Status Register or WAVE = 1.
1 = RB load has occurred since the last read of the Status Register if WAVE = 0.
•
ETRGS: External Trigger Status
0 = External trigger has not occurred since the last read of the Status Register.
1 = External trigger has occurred since the last read of the Status Register.
•
CLKSTA: Clock Enabling Status
0 = Clock is disabled.
1 = Clock is enabled.
•
MTIOA: TIOA Mirror
0 = TIOA is low. If WAVE = 0, then TIOA pin is low. If WAVE = 1, then TIOA is driven low.
1 = TIOA is high. If WAVE = 0, then TIOA pin is high. If WAVE = 1, then TIOA is driven high.
•
MTIOB: TIOB Mirror
0 = TIOB is low. If WAVE = 0, then TIOB pin is low. If WAVE = 1, then TIOB is driven low.
1 = TIOB is high. If WAVE = 0, then TIOB pin is high. If WAVE = 1, then TIOB is driven high.
31
30
29
28
27
26
25
24
–
–
–
–
–
–
–
–
23
22
21
20
19
18
17
16
–
–
–
–
–
MTIOB
MTIOA
CLKSTA
15
14
13
12
11
10
9
8
–
–
–
–
–
–
–
–
7
6
5
4
3
2
1
0
ETRGS
LDRBS
LDRAS
CPCS
CPBS
CPAS
LOVRS
COVFS