Rainbow Electronics T5761 User Manual
Features, Description

1
Features
•
Frequency Receiving Range of
f
0
= 868 MHz to 870 MHz or f
0
= 902 MHz to 928 MHz
•
30 dB Image Rejection
•
Receiving Bandwidth B
IF
= 600 kHz for Low Cost 90-ppm Crystals
•
Fully Integrated LC-VCO and PLL Loop Filter
•
Very High Sensitivity with Power Matched LNA
•
High System IIP3 (-16 dBm), System 1-dB Compression Point (-25 dBm)
•
High Large-signal Capability at GSM Band
(Blocking -30 dBm at +20 MHz, IIP3 = -12 dBm at +20 MHz)
•
5 V to 20 V Automotive Compatible Data Interface
•
Data Clock Available for Manchester- and Bi-phase-coded Signals
•
Programmable Digital Noise Suppression
•
Low Power Consumption Due to Configurable Polling
•
Temperature Range -40
°C to +105°C
•
ESD Protection 2 kV HBM, All Pins
•
Communication to Microcontroller Possible Via a Single Bi-directional Data Line
•
Low-cost Solution Due to High Integration Level with Minimum External Circuitry
Requirements
Description
The T5760/T5761 is a multi-chip PLL receiver device supplied in an SO20 package. It
has been especially developed for the demands of RF low-cost data transmission
systems with data rates from 1 kBaud to 10 kBaud in Manchester or Bi-phase code.
The receiver is well suited to operate with the Atmel’s PLL RF transmitter T5750. Its
main applications are in the areas of telemetering, security technology and keyless-
entry systems. It can be used in the frequency receiving range of f
0
= 868 MHz to
870 MHz or f
0
= 902 MHz to 928 MHz for ASK or FSK data transmission. All the state-
ments made below refer to 868.3 MHz and 915.0 MHz applications.
Figure 1.
System Block Diagram
Demod.
IF Amp
LNA
VCO
PLL
XTO
Control
T5760/
T5761
1...5
µC
Power
amp.
XTO
VCO
PLL
T5750
Antenna
Antenna
UHF ASK/FSK
Remote control transmitter
UHF ASK/FSK
Remote control receiver
UHF ASK/FSK
Receiver
T5760/T5761
Preliminary
Rev. 4561B–RKE–10/02