beautypg.com

Installation, Chapter 3 installation, Electronic distributor control shaft installation – Grain Systems Bucket Elevtors, Conveyors, Series II Sweeps PNEG-1813 User Manual

Page 8

background image

8

PNEG-1813 Electronic Distributor Control

3. Installation

Electronic Distributor Control Shaft Installation

Install the shaft (DEC0009) to the distributor shaft using two (2) roll pins (S-9288). NOTE: Flag extension
should be installed in line with the spout to ensure proper alignment with the sensor.

(See Figure 3A.)

Figure 3A Electronic Distributor Control Shaft