Grain Systems Bucket Elevtors, Conveyors, Series II Sweeps PNEG-1813 - Manual (Page 50)

6. Troubleshooting
50 PNEG-1813 Electronic Distributor Control
Message
You cannot select a locked-out position. Please select a different position.
Reason
This error displays when trying to choose a spout position that is locked out.
Remedy
Select a different position.
Message
The spout has drifted out of position. Please verify current position of the spout.
Reason
This error occurs when spout position reading changes without a move command being issued.
Remedy
Check mechanical components for looseness, wear or damage. Repair or replace as necessary.