Grain Systems Bucket Elevtors, Conveyors, Series II Sweeps PNEG-1813 - Manual (Page 35)

4. Operation Procedures
PNEG-1813 Electronic Distributor Control 35
Drive Fault Screen
Figure 4I Drive Fault Screen
Move Screen
This screen allows the user to change the distributor’s current spout position. The green highlighted spout
number indicates the current selection. A spout number with a red circle with a line through it indicates a
position that is currently locked out. (See “Position Lock-Out Screen”
on Page 42 .) (See Figure 4J.)
NOTE: The default names for each spout will be “BIN #”, see “Position Names Screen” on Page 38 for
customizing the spout names.
Figure 4J Move Screen