beautypg.com

Control panel installation guidelines – Grain Systems Bucket Elevtors, Conveyors, Series II Sweeps PNEG-1813 User Manual

Page 30

background image

3. Installation

30

PNEG-1813 Electronic Distributor Control

Control Panel Installation Guidelines

The following recommendations must be followed when installing and mounting the control panel:

All wiring should be performed by a licensed/qualified electrician in accordance with the National Electric
Code (NEC), state codes and local codes.

Never mount the control panel immediately beside or above heat generating equipment or directly below
water or steam pipes.

The atmosphere surrounding the control panel must be free of combustible vapors, chemical fumes and
corrosive materials.

The location of the control panel and the routing of cables should provide safe access for maintenance
and suitable operation of the control panel.

Mount the control panel on a flat, vertical surface using 1/4" fasteners.

Ensure that the mounting surface is sufficient to support the weight of the control panel.