Grain Systems Bucket Elevtors, Conveyors, Series II Sweeps PNEG-1813 - Manual (Page 39)

4. Operation Procedures
PNEG-1813 Electronic Distributor Control 39
Create/Modify Spout Name
1. From the “Setup Menu”, select “Position Names” to bring up the “Create/Modify Spout
Names” screen.
2. Press the spout name to be modified to display an alphanumeric keypad. (See Figure 4O.)
Figure 4O Alphanumeric Keypad
3. Type in the desired name for the spout position and press “enter”.
4. Select “OK” to return to “Setup Menu”.
Create/Modify Distributor Name
1. From the “Setup Menu”, select “Position Names” to bring up the “Create/Modify Spout
Names” screen.
2. Next to ochre “Distributor Name” label, press the distributor name to display an alphanumeric keypad.
(See Figure 4O.)
3. Type in the desired name for the spout position and press “enter”.
4. Select “OK” to return to “Setup Menu”.