Grain Systems Bucket Elevtors, Conveyors, Series II Sweeps PNEG-1813 - Manual (Page 44)

4. Operation Procedures
44 PNEG-1813 Electronic Distributor Control
Homing Warning
To help ensure accurate positioning of the distributor a homing warning will display when the number of
times the distributor is repositioned is equal to the homing interval. This message will occur every time that
a spout move is attempted until the homing procedure is completed. The user will be given two (2) options:
“Home Now” and “Home Next Move”.
(See Figure 4V.)
Figure 4V Homing Warning
Home Now
Select to perform the homing calibration immediately. The user interface will return to the “MAIN”
screen and “Homing” will flash ON and OFF in yellow. After homing is complete, the spout will return to
the selected position.
Home Next Move
Select “Home Next Move” to skip the homing operation and move to the selected position. The user
interface will continue to prompt you to home the unit during every subsequent move until homing
is performed.