beautypg.com

Manual override – Grain Systems Bucket Elevtors, Conveyors, Series II Sweeps PNEG-1813 User Manual

Page 45

background image

4. Operation Procedures

PNEG-1813 Electronic Distributor Control

45

Manual Override

Located on the front of the controller is a manual/jog dial. This manual override is key locked and should
only be used in case of a major equipment failure. It allows for manually moving the spout in the direction
you turn the dial when the key is inserted.

It is recommended that two (2) people perform this procedure. One person to operate the manual/jog dial
and another to look through the distributor and verify alignment of the spout.

(See Figure 4W.)

NOTE: Panel will not close with key inserted in the manual/jog dial. Always keep key in a safe location for

access by authorized personnel only.

Figure 4W

Manual/Jog dial