Grain Systems Bucket Elevtors, Conveyors, Series II Sweeps PNEG-1813 - Manual (Page 49)

6. Troubleshooting
PNEG-1813 Electronic Distributor Control 49
Message
The VFD has faulted. Please check for proper operation of the VFD.
Reason
This error displays when the variable frequency drive does not perform properly.
Remedy
Repair or replace the VFD as necessary.
Message
The bucket elevator is running. Please stop feed before moving.
Reason
This error displays when trying to perform a move while bucket elevator is running.
Remedy
Stop bucket elevator before performing spout move.
Message
You cannot lock-out this position because it is currently in use. Move the spout to a different
position and then lock-out this position.
Reason
This error displays when trying to lock-out a spout position that is in use.
Remedy
Move spout to a different position and then lock-out this position.
Message
You are attempting to move to the currently selected position. Please select a different position.
Reason
This error displays when trying to move spout to current position.
Remedy
Select a different position.