Veris Technologies MSP3 - Operating Instructions User Manual

Page 40

Pub. #OM17-MSP3

4-20

3-point Adjustment

Turn the top link (Figure 60) to adjust the tilt and level the unit.
This is the optimal setting for all fields types. Extending the top
link will cause the rear of the unit to move down. Shortening the
top link will cause the inverse.

Row Unit Adjustment

Adjust side depth wheels on optical row unit to allow deeper or
shallower mapping. Move T-handle (Figure 61) backward for
deeper depth. Depth wheels should be snug, but freely moving,
against the disks. See Section 5-3 for more information.

Adjust spring pressure on row unit as needed. With implement
lifted to reduce pressure on springs, move handle forward to
reduce spring pressure and back to increase. Additional weight
may be required in hard soils. Reduce pressure in rocky
conditions to prevent damage to window. (Figure 62)

Row Cleaner Adjustment
The row cleaner needs to be adjusted for your
conditions, crop changes, and as coulters and
openers wear. Ideally, cleaners contact only the
trash, and do not disturb the soil.

To adjust row cleaner loosen bolts, 1, and slide
the down stop, 2, to the desired cleaning depth.
Forward for deeper cleaning and backward for
shallower cleaning.

Figure 63