Veris Technologies OpticMapper - Operating Instructions - Manual

Pub.# OM17-OpticMapper
OpticMapper
Table of Contents
Section 1
1-2 Warranty
1-3 Safety
Section 2
2-1 Electronics Overview and Set-up: EC Surveyor
2-3 Electronics Overview and Set-up: DataLogger
2-4 Electronics Overview and Set-up: OpticMapper External Controller
2-6 Software Set-up: SoilViewer
Section 3
3-1 Implement Overview and Set-up
3-2 Electro-hydraulics Set-up
Section 4
4-1 Field Operations - EC Surveyor with DataLogger
4-6 Field Operations - EC Surveyor with SoilViewer software
4-8 Field Operations - Implement
4-12 Field Operations – OpticMapper Row Unit
4-13 OpticMapper Data Flow
Section 5
5-1 Troubleshooting
5-2 SoilViewer Troubleshooting
5-3 OpticMapper Troubleshooting
Section 6
Maintenance and Service Procedures
6-1 #1. EC Surveyor signal testing
6-2 #2. Testing electrical continuity
6-4 #3. Diagnosing and correcting EC signal problems
6-10 #4. Spring plunger testing and replacement
6-12 #5. Diagnosing GPS-related problems
6-16 #6. Firmware updates and SD card formatting
6-19 #7. Implement lubrication
6-21 #8. Bearing replacement
6-22 #9. Micro-chip replacement
6-25 #10. Optical Wear plate and Side Wear plate replacement
Operating Instructions