Veris Technologies pH Manager - Operating Instructions - Manual

Pub.# OM17-MSP-pH
Mobile Sensor Platform
pH Manager
Table of Contents
Section 1
1-1 Warranty
1-2 Safety
Section 2
2-1 Electronics Overview and Set-up: EC Surveyor
2-2 Electronics Overview and Set-up: DataLogger
2-4 Software Set-up: SoilViewer
Section 3
Field Operations: Electronics
3-1 Field Operations
—Mapping pH with DataLogger
3-2 pH calibration and Controller set-up using DataLogger
3-6 Recording Data with DataLogger
3-12 Field Operations —Mapping pH with SoilViewer Software
3-15 pH calibration and Controller set-up using SoilViewer software
3-19 Recording Data with SoilViewer software
Section 4 Set-up and Field Operations: Implement
4-1 12v Power and Hydraulics Set-up
4-5 Implement Set-up and Adjustments
4-7 Field Operation Adjustments
Section 5
5-1 Maintenance and Service Procedures
Section 6
Troubleshooting
6-6 #1: Checking power inside External Controller
6-9 #2. Sampler Cylinder Hydraulics
6-12 #3. Communication between Instrument and External Controller
6-18 #4. Prox Sensor
6-21 #5. Diagnosing GPS-related problems
6-25 #6. Firmware updates and SD card formatting
6-26 #7. Micro-chip replacement
Operating Instructions