Veris Technologies MSP3 - Operating Instructions - Manual (Page 24)

Pub. #OM17-MSP3
4-4
Press #3 to continue with OM System check:
Figure 11
Figure 12
If the window is clean and in good condition (see 4-8), attach the dark side of the Reference to the
sensor. (Figure 12) Press any key to continue:
Figure 13
After the readings have settled the next screen will appear:
Figure 14
Turn the Reference block over and attach the light side of the Reference to the sensor. (Figure 12)
Press any key to continue:
Figure 15