M&C TechGroup CSS-VC2 Operator's manual - Manual (Page 6)

6 Gas sampling and gas conditioning technology 14.1a-ME
3 SAFETY
Please note the following basic safety precautions when installing, commissioning and
operating the device:
Before operation and use of the equipment, read the operating manual. The instructions and warnings
listed in the operating manual must be followed.
Work on electrical equipment must only be performed by qualified personnel in accordance with the
regulations currently in force.
The requirements of VDE 0100 together with its associated standards and regulations must be
complied with for the creation of power installations with nominal voltages up to 1000V.
When connecting the device, ensure the correct mains voltage in accordance with the specifications
on the rating plate.
Protection against contact with dangerously high electrical voltages:
Before opening the equipment, it must be switched off. This also applies to any connected external
control circuits.
Only use the device in approved temperature and pressure ranges.
Ensure installation is weather-protected. Do not directly expose to dust, rain or liquids.
The device must not be operated in hazardous areas;
Installation, maintenance, monitoring and any repairs must be performed by authorised personnel in
compliance with the relevant provisions.
4 WARRANTY
If the device fails, please contact M&C directly, or your M&C authorised dealer.
Provided that the device is used correctly, we undertake to provide a 1 year warranty from the date of
delivery according to our terms of sale. Consumables are not covered by the warranty. The warranty
covers free repair at the factory or free replacement of the device sent free to the point of use. Returns
must be made in sufficient and proper protective packaging.