Technical specifications – M&C TechGroup CSS-VC2 Operator's manual User Manual
Page 10

10
Gas sampling and gas conditioning technology
14.1a-ME
8
TECHNICAL SPECIFICATIONS
Gas conditioning series CSS ®
Version CSS-VC1
Version CSS-VC1
Article number 230V 50Hz
01G6050
01G6055
Article number 115V/50-60Hz
01G6050a
01G6055a
Gas outlet dew point
Setting range: + 2 ° C ..... + 7 ° C, factory setting: + 5 ° C
Dew point stability
under constant conditions < ± 0.1 ° C
Gas inlet temperature
**max. 180° C.
Gas inlet water-vapour saturation
**max. + 80 ° C
Gas flow
**max. 250 Nl/hr
**max. 2 x 150 l/h
Ambient temperature
** 10 ° C to + 40° C
Storage temperature
-25 ° C to + 65 ° C.
Pressure
0.7 bar to 1.4 bar abs.
Total cooling capacity **
max. 144 kJ/h
Number of gas inlets
1
2
Number of gas outlets
1
2
Condensate connection
1
2
Medium connections
Hose connection 4/6 mm
Material of parts in contact with
medium
Heat exchangers: Glass, PVDF or stainless steel 1.4571
Hoses/screwed connectors: PTFE/PVDF
Universal filter e.g. FP-2T-D: PVDF, FPM, glass, PTFE
Front-installed filter FPF-0.1GF: PVDF, glass, FPM
Front-installed filter FPF-2-0.3GF: PVC, FPM, PPH
Peristaltic pump SR25.2: PVDF, Novoprene ®
Liquid particle e.g. CLF-5/W: PVDF, glass, FPM, PTFE
Sample gas pumps N3/5/9: PVDF, PTFE, FPM
Flow meter FM40: PVDF, glass, FPM, Hastelloy C4
Ball valve 3L/PV and 5L/PV: PVDF, FPM
Operational
approx. 10 minutes.
Mains connection
230V 50-60Hz ± 10% or 115V 50-60Hz ± 10% ***
Power input
max. 220VA + max. 300VA for sample gas pumps
Device fuse
4A inert, 5x20 mm
Electrical connection
-
Cold-device connector with 2 m cable
-
Single alarm connections (11 & 12-pole) or status alarm(s)
(6-pole) : maximum capacity of the relays 24V 500mA
-
mA-outlet : maximum load 500Ohm, accuracy 2% of
measuring range end value for display indication
-
M&C Bus
-
Heated sample line : maximum length 10m
Device protection class
IP20 to EN 60529
Housing design
Steel housing for 19"- or wall mounting, painted RAL 7035
Device dimensions (H x W x D)
267.5 mm x 483 mm x 301.5 mm
(Portable version: 355 mm x 515 mm x 395 mm)
Electrical device standard
EN 61010
FPM = Viton ®
PVDF = Polyvinylidene fluoride
PVC = Polyvinyl chloride
FPM = Fluorinated rubber
PPH = Hard polypropylene
PTFE = Polytetrafluoroethylene
**Technical specifications with maximum values must be rated in consideration of total cooling capacity at 25° C and an outlet dew point of 5 ° C.
*** 115V/50Hz sample gas pump available as a special item