EVS XEDIO CleanEdit Version 4.2 - June 2012 User Manual - Manual (Page 81)

Xedio Suite Version 4.2 – User Manual – CleanEdit
EVS Broadcast Equipment – June 2012
Issue 4.2.B
67
6.2.7 C
REATING AND
W
ORKING WITH
C
LIPS IN THE
P
LAYER
When you have defined the portion of the media you want to place into the
timeline, you can create a clip out of it and either store it in the Clip zone in the
Project area and/or place it directly in the timeline.
To create a clip, you will mainly use the Clip Creation buttons available in the
Player area. These buttons are described in the section below.
C
LIP
C
REATION
F
IELDS
The following table describes the various fields that are used to create clips:
Field/Button Keyboard
Shortcut Function Name and Description
or
Mark IN
Sets a mark IN point at the nowline position on
the media bar:
• A timecode value is added in Mark IN TC field.
• A [ sign is shown on the video display
• A green mark is added at this timecode on the
media bar.
or
Mark OUT
Sets a mark OUT point at the nowline position on
the media bar:
• the timecode value is added in Mark OUT TC
field.
• A ] sign is shown on the video display
• A red mark is added at this timecode on the
media bar.
Clip Name
Field where the clip name can be entered.
Mark IN TC
Timecode of the Mark IN defined on the loaded
media.