EVS XEDIO CleanEdit Version 4.2 - June 2012 User Manual - Manual (Page 29)

Xedio Suite Version 4.2 – User Manual – CleanEdit
EVS Broadcast Equipment – June 2012
Issue 4.2.B
15
2.8.2 M
ARKING
P
OSITION ON THE
T
IMELINE
Using the buttons displayed on the screenshot below, you can mark points to edit
accurately on the timeline. You can use these marks to place your clips into the
timeline.
The following marks can be defined in the timeline:
Name Description To define the mark, …
Nowline blue vertical line, which
displays the current
position on the timeline
click on the timeline ruler where you want
to place the nowline.
Mark IN green vertical line,
which displays the
position of a mark IN
point
place the nowline at the requested position
and click the Mark IN button
.
Mark OUT red vertical line, which
displays the position of
a mark OUT point
place the nowline at the requested position
and click the Mark OUT button
2.8.3 M
ODE TO
P
LACE THE
C
LIP ONTO THE
T
IMELINE
Before you drag a clip onto the timeline, you need to define the way you want to
insert it. Two modes are available: Overwrite or Insert.
You select the mode by clicking the Overwrite/Insert Mode button, which allows
the user to toggle the mode.