EVS XEDIO CleanEdit Version 4.2 - June 2012 User Manual - Manual (Page 80)

Issue 4.2.B Xedio Suite Version 4.2 – User Manual – CleanEdit
EVS Broadcast Equipment – June 2012
66
• If you position the mouse on the middle area and rotate the mouse wheel up or
down, you respectively enlarge or reduce the dark grey area, hence increasing
or reducing the portion of the media included in the top area.
• If you click on the dark grey area and drag it, you shift the portion of media
included in the top area.
• When a mark IN and mark OUT are defined, double-clicking on the dark grey
area will toggle the portion covered by the top area from the entire media
length to the clip length (portion between mark IN and mark OUT).
N
OWLINE
, M
ARK
IN
AND
M
ARK
OUT
Three positions can be defined in the media bar:
• An IN point marked on the media is shown as a green line.
To add a mark IN, click at the requested position on the media bar and click
the Mark IN button
.
• An OUT point marked on the media is shown as a red line.
To add a mark OUT, click at the requested position on the media bar and click
the Mark OUT button
.
• The nowline, that is to say the current position within the media, is shown as a
blue line.
To place the nowline at a given position, simply click at the requested position
on the media bar.
To move their position, click on them with the mouse and drag them to the desired
position.
When the media is being played, the nowline moves along the top area of the
media bar. If the portion of the top area covers only a part of the media, the
nowline may disappear. In this case, a red indicator, on the left side or on the
right side of the Media bar will be displayed. A click on the vertical indicator (on
the left or right side) will re-centre the top area to the nowline.