EVS XEDIO CleanEdit Version 4.2 - June 2012 User Manual - Manual (Page 153)

Xedio Suite Version 4.2 – User Manual – CleanEdit
EVS Broadcast Equipment – June 2012
Issue 4.2.B
139
Button Description
The Match Frame button allows the user to retrieve the original
media that contains the image displayed in the Recorder and load this
same image in the Player.
The RET button allows the user to load, in the Player, the EVS Server
record train that contains the image displayed in the Recorder.
7.11.3 T
RIMMING OR
R
OLLING
A
ROUND THE
C
LIP
T
RANSITION
I
NTRODUCTION
The three upper buttons make it possible to trim around a clip transition. The
following table describes what the buttons are used for.
Button Description
The Trim OUT button allows the user to modify the OUT point of the
clip before the transition:
• by adding a frame to it when you click the button.
• by removing a frame to it when you press SHIFT and click the
button simultaneously.
The Trim IN button allows the user to modify the IN point of the clip
after the transition:
• by adding a frame to it when you click the button.
• by removing a frame to it when you press SHIFT and click the
button simultaneously.
This Roll Transition button allows the user to modify both the OUT
point of the clip before the transition AND the IN point of the clip after
the transition.
This function ‘rolls’ the transition:
• on the right when you click the button.
• on the left when you press SHIFT and click the button
simultaneously.
A
CTIVATING THE
T
RIM
F
UNCTIONS
These buttons are only available when the nowline is located on a transition
common to all selected tracks. For each track unused on the transition, the
corresponding Track Selection check box must be cleared.
When you first use one of the Trim functions, it changes the configuration of the
Player and the Recorder preview windows: