EVS XEDIO CleanEdit Version 4.2 - June 2012 User Manual - Manual (Page 25)

Xedio Suite Version 4.2 – User Manual – CleanEdit
EVS Broadcast Equipment – June 2012
Issue 4.2.B
11
2.6 ADDING MEDIA TO THE PROJECT
When you have identified the media required in the database using the Media
Manager tab, you can add it to your media, to your edit, or directly to the timeline
by clicking on it and dragging it onto one of the Project sub-zones.
Each drag action produces a different result. The possible actions are explained in
the table below.
Note:
If you do not want to place the media directly in the timeline, ensure that
the Fill button is not active
.
You want to … You need to …
Add the media to the project, without
further action.
Drag and drop the media to the Media
zone.
Add the media to your project and in
the Clip zone, but not to the timeline.
Drag and drop the media to the Edit zone
or Clip zone without activating the Fill
button.
Add the media to your project, in the
Clip zone, and place it at the end of
the timeline.
Activate the Fill button, then drag and
drop the media to the Clip zone.