EVS XEDIO CleanEdit Version 4.2 - June 2012 User Manual - Manual (Page 140)

Issue 4.2.B Xedio Suite Version 4.2 – User Manual – CleanEdit
EVS Broadcast Equipment – June 2012
126
E
XAMPLE
In the example below, the Blank Clear button is used to remove the blanks
common to all tracks:
Before
After
7.7.3 A
LIGNING
E
LEMENTS ON A
R
EFERENCE
E
LEMENT
You can align left or right one or more elements on a reference element with the
or :
• A left alignment means you will align the IN point of the elements on the IN
point of the reference element.
• A right alignment means you will align the OUT point of the elements on the
OUT point of the reference element.
The elements which are aligned will overwrite existing material on the timeline.
To right or left align elements on a reference element, proceed as follows:
1. Using CTRL + click, select:
a. first the elements to align,
b. last the reference element (on which the other elements should be
aligned).