EVS XEDIO CleanEdit Version 4.2 - June 2012 User Manual - Manual (Page 130)

Issue 4.2.B Xedio Suite Version 4.2 – User Manual – CleanEdit
EVS Broadcast Equipment – June 2012
116
• Drag the clip in the blank area, while pressing the ALT key:
If the clip is… Then…
greater than the hole in
the timeline
The clip speed will be decreased to match the
blank area.
smaller than the hole in
the timeline
The clip speed will be increased to match the
blank area.
The following criteria must be met:
• the parameter “Can Accelerate” must have been
enabled in Xedio Manager > Softwares >
Parameter Profiles > CleanEdit.
• the maximal speed, set with the “Max Fast
Motion Speed” parameter, must not be
exceeded.
E
XAMPLE
The following screenshots show the situation before, during and after the drag-
and-drop operation using the blank fill option. In this case, the clip is dropped at
the beginning of the blank area.
Before
During