EVS IPDirector Version 5.9 - January 2011 Part 6 User’s Manual - Manual (Page 97)

Issue 5.9.B IPDirector Version 5.9 – User Manual – Part 6: Playout – Playlist Panel
EVS Broadcast Equipment – January 2011
86
The selected speed value appears in the Speed column of the playlist grid.
Note
If an unknown speed is allocated to one playlist element, it will be
played out at the speed defined on the channel when the element comes
to air, for example the speed at which the previous element on-air played
at.
How to Set Speed by Direct Entry in the Playlist Grid
To define speed by direct entry in the playlist grid, proceed as follows:
1. Select one element in the playlist and make sure that the Speed column is
visible in the grid.
2. To define the playout speed of the element, modify the value by direct entry
in the Speed column. A value as a percentage between 0 and 400% can be
entered.
If the ESC key is used on the keyboard, the editable area is exited and the
original cell value is restored.
If the ENTER key is pressed or a different area is clicked on, the
modifications will be validated.
The selected speed value appears in the Speed column of the playlist grid.
S
ETTING A
C
USTOM
S
PEED FOR THE
O
N
-A
IR
E
LEMENT
Press the shortcut to set the speed of the on-air element, would it be
playing or paused.
Then enter a speed value in the Set Speed window:
The element will then play at the selected speed.
This is a temporary setting. It will be only used once.