EVS IPDirector Version 5.9 - January 2011 Part 6 User’s Manual - Manual (Page 118)

IPDirector Version 5.9 – User Manual – Part 6: Playout – Playlist Panel
EVS Broadcast Equipment – January 2011
Issue 5.9.B
107
Transition Effect Macro Command
When a macro command corresponding to a transition effect action (define
audio/video transition effect, define Still/Start mode, reset transition to default) is
applied to a playlist element, the macro command is applied on corresponding
elements from linked playlists.
L
IMITATIONS
In certain circumstances, the macro command will not be applied:
• In case of multiselection, the macro command will be applied to all the
elements of the selection, except when a macro command corresponding to
GPI, Mute On or Mute Off is linked to the current position.
• If the ‘Link to’ parameter is set to ‘current position’ and this position is not
known, because:
o
the playlist is off-line
o
the playlist is on-line but not loaded on a channel
o
the playlist element has been trimmed and the ‘Current Position’ selected
in the Settings is no more between the IN and OUT points of the element.
• If a GPI is not configured as OUTPUT GPI on the EVS video server, an error
message is displayed.