EVS IPDirector Version 5.9 - January 2011 Part 6 User’s Manual - Manual (Page 123)

Issue 5.9.B IPDirector Version 5.9 – User Manual – Part 6: Playout – Playlist Panel
EVS Broadcast Equipment – January 2011
112
• When the group is collapsed, the staple will be displayed on the group line
only, to indicate that the group includes a partial loop.
How to Activate the Global Loop Mode
To loop on the entire playlist, proceed as follows:
1. Open a playlist.
2.
Click the LOOP button
OR
Press the key on the keyboard.
The LOOP button changes from to .
The playlist will loop when it reaches its end.
Note
To remove a full loop, either click the LOOP button or press the
key on the keyboard again.
How to Define a Partial Loop
You can create a partial loop inside a playlist by using either the playlist element
contextual menu or the partial loop shortcut. Refer to the section ‘Rules for the
Use of Loops and Groups’ on page 111 for more information on what is allowed or
not.
If you use the contextual menu, proceed as follows:
1. Select one or several elements you want to be included in a loop inside the
playlist.
2. Right-click one of the element of the selection.
The Playlist Element contextual menu opens.
3. Select LOOP from the contextual menu.
The Define Loop window is displayed: