EVS IPDirector Version 5.9 - January 2011 Part 6 User’s Manual - Manual (Page 126)

IPDirector Version 5.9 – User Manual – Part 6: Playout – Playlist Panel
EVS Broadcast Equipment – January 2011
Issue 5.9.B
115
• Exit as soon as possible to be able to exit the loop immediately when
pressing the GoTo Element button
OR
• Exit on element markOUT to be able to exit the loop as soon as the OUT
point of the current element is reached after having pressed the GoTo
Element button.
The selected option is displayed under the button :
3. Select the playlist element you want to be played when exiting the loop.
4. Click the GoTo Element button to exit the loop according to the selected
mode.
The loop is exited and the selected element is then played taking into account its
still/start modes, transition effects, speed, tags.
M
ODIFYING A
L
OOP
How to Insert an Element Inside a Full or a Partial Loop
It is still possible to insert elements inside a partial loop after the creation of the
loop. You man also insert elements inside a full loop even when it is playing. To
do so, proceed as follows:
1. Select one or several elements to include in a loop inside the playlist.
2. Drag the element(s) into the playlist grid, between the first and the last
elements of the loop.
The element(s) are inserted within the loop.
How to Remove an Element from a Partial Loop
The user can remove one or several elements from a partial loop.
1. Select one or several elements to remove from the loop.
2. Right-click one of the elements of the selection and select Remove element
from the Playlist Element contextual menu.
A confirmation message will be displayed depending on the status of the
playlist being edited:
If the playlist is off-line: