EVS IPDirector Version 5.9 - January 2011 Part 6 User’s Manual - Manual (Page 158)

IPDirector Version 5.9 – User Manual – Part 6: Playout – Playlist Panel
EVS Broadcast Equipment – January 2011
Issue 5.9.B
147
Effect Duration
Allows you defining duration of the audio and video transition effects, in case ‘mix’
or ‘wipe’ has been selected.
A
CTION
= S
TILL
/S
TART
M
ODE
When a Still/Start Mode action is applied to an element, a specific way of stopping
and starting the playout of the element is applied. Refer to section ‘Define
Still/Start Mode Window’ on page 89 for more information on the different options.
Selecting Still/Start Mode action in the Playlist Macro Commands Settings displays
the Define Still/Start Mode parameters window:
A
CTION
= D
EFAULT
T
RANSITION
When a Default Transition action is applied to an element at a given timecode, the
playout parameters are reset to the default values specified in the Tools >
Settings > Playlist > Playlist / Default Transition category.
Selecting Default Transition action in the Playlist Macro Commands Settings does
not display any configuration window as there is no parameter to define.
A
CTION
= F
REEZE
When a Freeze action is applied to an element, a Freeze effect is inserted within
the element. Refer to section 1.7.6 ‘Inserting a Freeze Effect in a Playlist Element’
on page 94 for more information on this effect.
Selecting Freeze action in the Playlist Macro Commands Settings displays the
Freeze window: