EVS IPDirector Version 5.9 - January 2011 Part 6 User’s Manual - Manual (Page 104)

IPDirector Version 5.9 – User Manual – Part 6: Playout – Playlist Panel
EVS Broadcast Equipment – January 2011
Issue 5.9.B
93
1.7.5 R
ESETTING
P
LAYOUT
P
ARAMETERS TO
D
EFAULT
It is possible to reset the following playout parameters to the default values
specified in the Tools > Settings > Playlist > Playlist / Default Transition
category:
• speed,
• still mode, start mode,
• A/V effect
for all the selected elements. For more information on the values defined as
default values, refer to section 1.9.3 ‘Default Transition Settings’ on page 136.
Resetting parameters to default can be done in two ways:
• Selecting Reset transition to default option from the Playlist Element
contextual menu
• using a macro command, previously configured to correspond to the option.
Refer to section 1.7.9 ‘Applying a Macro Command to Trigger Playout Effects’
on page 105 for information on using macro commands and to section 1.9.5
‘Playlist Macro Commands Settings’ on page 140 for information on configuring
macro commands.