EVS IPDirector Version 5.9 - January 2011 Part 6 User’s Manual - Manual (Page 51)

Issue 5.9.B IPDirector Version 5.9 – User Manual – Part 6: Playout – Playlist Panel
EVS Broadcast Equipment – January 2011
40
1.5.5 M
OVING WITHIN A
P
LAYLIST
E
LEMENT
Two options enable the users to define a point in time where they want the system
to jump to, within a playlist element. This permits the review of a specific part of a
subject before it is played out.
H
OW TO
J
UMP TO A
R
EMAINING
T
IME
V
ALUE
From the Time until Transition field, it is possible to perform a jump to a defined
time before the OUT point of a selected element. To do so, proceed as follows:
1. Select a playlist element.
2. Click in the Time Until Transition field
OR
press key.
The value displayed is ’00:00:00:00’.
3. Enter the remaining time duration, corresponding to the point you want the
system jumps to.
4. Press ENTER.
The system jumps to the timecode corresponding to the remaining time duration
before the OUT point.
H
OW TO
J
UMP TO AN
E
LEMENT
T
IMECODE
To jump to a specific timecode within an element, proceed as follows:
1. Select a playlist element.
2.
Click in the GoTo Element Timecode button
OR
press key.
The GoTo Element Timecode zone is displayed.
3. Enter the timecode value, corresponding to the point you want the system
jumps to.
4. Press ENTER.
The system jumps to the defined timecode of the selected element.