EVS IPDirector Version 5.9 - January 2011 Part 6 User’s Manual - Manual (Page 96)

IPDirector Version 5.9 – User Manual – Part 6: Playout – Playlist Panel
EVS Broadcast Equipment – January 2011
Issue 5.9.B
85
1.7.3 S
ETTING THE
P
LAYOUT
S
PEED
The default speed value is defined in the Tools > Settings > Playlist > Playlist /
Default Transition category. Refer to section 1.9.3 ‘Default Transition Settings’
on page 136 for details on the settings options.
The users can define a different playout speed for each element of a playlist or
they can set a custom speed only for the air-element.
S
ETTING THE
P
LAYOUT
S
PEED OF SOME
E
LEMENTS
The speed can be set in two different ways:
• through the Playlist Element contextual menu
• by direct entry/selection in the playlist grid
These settings are permanent; they will be used each time the element is played.
How to Set Speed Using the Playlist Element Contextual
Menu
To define playout speed using the Playlist Element contextual menu, proceed as
follows:
1. Select one or several elements in the playlist for which you want to define
effects.
2. Right-click one of the elements.
The Playlist Element contextual menu opens.
3. Select Set Speed from the menu.
A sub-menu opens
4. Do one of the following:
• Choose the desired speed from the list of preset values
OR
• Select Custom speed from the contextual menu and enter an exact speed
value in the popup window which is displayed: